***Please make sure you select the correct model you want as there is a price difference.***
Models: The old model functions the same as the new model. The difference is we filled in the gap between the front of the red dot and the slide.
This precision-machined adapter plate allows for the mounting of the Trijicon RMR or, any variants otherwise with the RMR mounting pattern, to the Glock MOS system. We take immense pride in the aesthetics and quality of parts we produce. Each part is inspected with calibrated precision measuring tools and checked against a model print to maintain tight tolerances.
Fits: Glock MOS; Trijicon RMR; Holosun 507 and Holosun 508; full-size models. All mounting hardware needed comes with the order.
Precision Machined 4140 alloy steel, coated with a copper phosphate to aid in corrosion resistance.
Install instructions for The CNC Pros MOS-RMR adapter plate:
1- Make sure the surfaces and threads are clean and free from debris. Apply a light coat of oil or grease to the adapter plate to prevent rusting.
2- Loctite 222 (purple) is recommended. Absolutely under no circumstances should any red, green or blue thread lockers be used.
3- Put a drop of 222 on the internal threads and on the thread's screws.
4- Use the supplied 3mm and 4-40 screws
5- Very Important Note: Use a reliable torque driver set 10-13 IN. LBS
6- Allow to cure for 24 hours.
