This precision-machined adapter plate allows for the mounting of the Holosun EPS or, any variants otherwise with the Glock MOS mounting pattern. We take immense pride in the aesthetics and quality of the parts we produce. Each part is inspected with calibrated precision measuring tools and checked against a model print to maintain tight tolerances.
Built in-house. Made from heat-treated alloy steel.
Fits Glock Models: 17, 19, 20, 21, 22, 23, 34, 33, 40, 41, and 45.
Precision Machined from heat-treated 4140, coated with a copper phosphate to aid in corrosion resistance.
Install instructions for The CNC Pros Glock MOS to Holosun EPS adapter plate:
1- Make sure the surfaces and threads are clean and free from debris. Apply a light coat of oil or grease to the adapter plate to prevent rusting.
2- Loctite 222 (purple) is recommended. Absolutely under no circumstances should any red, green, or blue thread lockers be used.
3- Put a drop of 222 on the internal threads and on the thread's screws.
4- Use the supplied 4-40 and M3 x 0.5 screws.
5- Very Important Note: Use a reliable torque driver set 10-13 IN. LBS
6- Allow to cure for 24 hours.
