This precision-machined adapter plate allows for the mounting of the Holosun 509T or, any variants otherwise, to the CZ P10. We take immense pride in the aesthetics and quality of the parts we produce. Each part is inspected with calibrated precision measuring tools and checked against a model print to maintain tight tolerances.
Fits: CZ P10. **May fit other models, listed is what we've tested.** All mounting hardware needed comes with the order.
Precision Machined 4140 alloy steel, coated with a copper phosphate to aid in corrosion resistance.
Install instructions for The CNC Pros CZ P10 to Holosun 509T adapter plate:
1- Make sure the surfaces and threads are clean and free from debris. Apply a light coat of oil or grease to the adapter plate to prevent rusting.
2- Loctite 222 (purple) is recommended. Absolutely under no circumstances should any red, green, or blue thread lockers be used.
3- Put a drop of 222 on the internal threads and on the thread's screws.
4- Use the supplied M3 x 0.5 screws.
5- Very Important Note: Use a reliable torque driver set 10-13 IN. LBS
6- Allow to cure for 24 hours.
