Built in-house. Made from heat-treated alloy steel.
Fits Glock Models: 17, 19, 20, 21, 22, 23, 34, 33, 40, 41, and 45.
Install instructions for The CNC Pros MOS adapter plate:
1- Make sure the surfaces and threads are clean and free from debris. Apply a light coat of oil or grease to the adapter plate to prevent rusting.
2- Loctite 222 (purple) is recommended. Absolutely under no circumstances should any red, green or blue thread lockers be used.
3- Put a drop of 222 on the internal threads
and on the thread's screws.
4- Use the supplied 3mm screws
5- Very Important Note: Use a reliable torque driver set 10-13 IN. LBS
6- Allow to cure for 24 hours.
